How to use the vacuum pump to grow a member?GUIDELINES

Vacuum pump to increase a member

Using a special pump with a vacuum mechanism helps not only to strengthen the lifting but also increase the size of the penis, as well as reach a longer intimate contact.The principle of operation of this device is the change in the pressure-dye in the air pumping from the balloon to the pump, the penis increases in volume and receives a elevated condition.

Moreover, regular training with the vacuum pump is cured by the pelvic organs, increasing blood circulation and oxygen saturation tissue, vitamins and trace elements.Of course, to achieve all these effects, it is necessary to use the pump properly.We will show you how to use the vacuum pump in this article.

Pump mechanism

The vacuum pump design is a cylindrical container and a pump, with which the air is pumped by this balloon.In it, the genitals are placed during the procedure.Due to the effects created by air and airless spaces using the device, the result is achieved to increase penis parameters.

Increase a member of pumping

The process is as follows:

  1. During air pumping, the pressure is reduced by the balloon;
  2. Blood circulation increases significantly, blood is actively rushing into penis tissue;
  3. During negative pressure, blood flow has improved;
  4. The caves, of which the consistency of the fake, are filled with blood;
  5. Penis blood vessels increase it - both in length and in volume.

Such training with the vacuum pump allows, with the regularity of their implementation, add up to 4 cm to a month's length, and in the Girth - up to one and a half.It is necessary to use a vacuum pump for this daily-2-3 times a day, approaching 20 minutes.

How to use it properly

The mile that the pompous class is high quality and effective, it is necessary to master the right technique.Errors when pumping the penis can cause injuries - vascular gap, hematoma and edema.Beginners are particularly recommended to pay attention to the rules for using a vacuum pump.

Increase a penis using a vacuum pump

General rules and recommendations when pumping genitalia include the following points:

  • Carefully follow the hygiene of the genitals before and after the procedure;
  • Also before and after using the pump, clean the penis and pump using warm water and soap;
  • Before the procedure, perform a hot penis penis with a towel immersed in hot water or doing a bath/shower;
  • Initial use of the pump should be short - about 5 minutes;
  • Then time should be gradually increased, reaching 15-20 minutes at the bottom;
  • An increase after single use will take about 2 hours;
  • A post pumping will stay for 30 minutes - an hour.

Using a vacuum pump is effective for a rapid growth of a member before sexual intercourse.

In general, all types of equipment are effective, however, the rules of use may vary depending on the type of device.

When using the pump, it is necessary to monitor the skin of the genitals and their general condition.In the case of infectious and inflammatory processes in this area, it will be necessary to refuse the use of the pump.

Jog

By preparing the use of hygiene and heat, study the instructions carefully.Proper use of the device and compliance with technology will avoid damage and make the process safe.

The use scheme is as follows:

  • The vacuum cylinder should be tightly pressed at the base of the penis barrel.If a raising ring is glued to the bag, place it, pressing it in the pubis.
  • Gradually start pumping the air with a pear;Movement should not be too intense.
  • Continue first lesson for 5 minutes;Over time and experience, increasing it to 10.
  • In case of pain, stop using.
  • Between approaches it is necessary to take a 30-60 second vacation;At this time, it is recommended to perform intimate massage.
  • On a procedure, it is recommended to perform 5 sinking access.

When using a simple pump with a manual mechanism, it will have to act independently;The electrical version will work for you.The withdrawal level can be monitored using built -in sensors;The main thing is not to try to increase the size of the penis as soon as possible.A tissue growth is a complex biological process and should occur at a corresponding pace.

Hydrop

Water pumps are considered easier to use;This type of device allows you to have a soft effect while you remain effective.The principle of functioning of the hydraulicum is similar to the previous option.

Pomping is performed as follows:

  1. Perform the pre -heating of the penis;
  2. Fill the device with warm water and head down;
  3. Then place the device, moving from the bottom up and press it to the base of the penis;
  4. Next, it is necessary to give the pump with a horizontal position and begin to improve the pressure;
  5. Then the air must be pumped and dried.

In one procedure, it is recommended to perform 5 pumping approaches in 20 minutes.Make sure that before extracting the penis from the pressure balloon is flattened;Otherwise, you risk getting micrococks and other injuries.

Pumping methods of a member

There are several different techniques for using a vacuum pump.The general procedure for all of them is the preliminary heating of the genitals: this is possible with the help of a towel immersed in hot water, as well as adopting a bath or hot shower;Make sure the water is not too hot.

In addition, before any type of pumping, it is recommended to heat up with your hands - may be intimate massage techniques, and stretching, etc.

PACKING

electrical

This pump use technique is created to have a maximum effect on the penis.It is aimed at a greater extent for penis lengthening.In this case, the genitals should be placed in a balloon with a diameter slightly larger than the phallus itself.

The packaging is performed as follows:

  • As a preparation, it is necessary to reach an 80%rise level;
  • Next, it is worth using the lubricant and pressing the cylinder tightly in the pubis;
  • Check that the sliding process is smooth;
  • Set the minimum load and follow the sensors, mentioning your feelings.This is useful to further determine the necessary load.

At first, do not set the voltage to the maximum and do not completely extend the member - this can be done by removing the air from the cylinder not completely.The first set should take 10 minutes.During the execution of the second group, increase the pressure and extend the time to 15 minutes;In the third - reinforce the voltage and pump for 20 minutes.

Between these approaches it is necessary to last 5 minutes for vacation;Prior to each other approach, the elevation level must increase to 90 %.You need to train this way within a week;In the second week, pumping loads increase.The maximum pumping time is 25 minutes.

Classic Member Pumping Technique

Classic method for using a vacuum pump to increase the penis in both parameters includes two main techniques:

  • Extension of the protein membrane;
  • Grow the cave bodies of the penis.

Their execution schemes are slightly different from one another.

Hand pump

Training

  • Massage scrotum for 5 minutes;
  • Heating with a ferry for 5-10 minutes;
  • Extends up, down and on the sides-10-15 minutes;
  • Strong voltage - 10 minutes;
  • Reverse elongation/sadsak/a-resting-10 minutes;
  • Yelking (dry or wet) - 50 repetitions;
  • Packaging - 3 access.

Vascular technique to increase volume

  • Massage scrotum - 5 minutes;
  • Warring - 10 minutes;
  • Forward extension of medium intensity - 5 minutes;
  • Yelking - 100 movements;
  • Bending a raised penis - 10 minutes;
  • Sitting in a penis with an incomplete lift - 10 minutes;
  • A pumping approach.

The number of approaches and breakdowns between them remains similar packaging techniques;However, the pump cylinder should be wider, which will work well to increase volume.

At rest between approaches, perform the penis push;Do it carefully to prevent painful sensations.

Upon completion of the whole procedure, it is recommended to apply a basic moisturizer to the genitals - for example, lotion for the children's body, or use a special oil from the bruises.

From what phase does the procedure consist of

As you can already notice, the process of using a vacuum pump includes several stages.To achieve the desired result, it is necessary to observe the advantage.We do not recommend that you lose the stages or change them in places - the correct execution will be the key to safe use of the pump.

Heating a member compressed by a hot towel

Heating

Before using the pump, it is necessary to dissolve blood.To do this, heat a penis is performed - this can be done with a ferry, a compress of hot towels or, with a simple acceptance of a shower/bath.




Rigid

Rigid

Extension to the Jelking technique is used as preparation before using the pump.It is necessary to perform the "milking" of the penis, as the genitalia was previously lubricated with a lubricant.The root of the barrel is compressed by the grip of the thumb and thumb;This catch moves forward toward the head.For the emergence of an average level of elevation - about 50% requires 50 such movements;For the maximum allowable level of 80-90%-around 100 repetitions.

How to wear in a pump correctly

The pump cylinder must be placed on a member in a semi -advanced state.The barrel of the penis, the pubis and the breeze edge are processed with a lubricant.At the same time, do not allow lubrication in the scrotum to prevent its absorption in the balloon.

Then you need to create a closed space with rotary motions and slowly pressing the pump in the pubic area.Will also allow lubrication evenly.Make about 5 such movements to achieve complete tightness.

Haunted

Using a vacuum pump can be performed in two ways - with maximum and minimal running injection.

  1. Minimal accumulation of lymph

    To get started, it is necessary to set a slight degree of pressure.The suction process should not bring discomfort.Once the suction is completed, make some moves in the balloon, touching the genitalia.

    From the sensations you should feel a pleasant pulse and a change in pressure within 10 minutes.In the next 5 minutes, it is necessary to increase the pressure more strongly.If at the same time you feel a burning or tingling, reduce the pressure to a value.

    At the end of the procedure, the genitals should become more severe;It should be taken at hand and perform a slight oscillation.Then lubricate the member and perform the milking technique.

    In the second approach, increase the pressure with one unit, and with the third - from two.In the end, perform the Jelking technique.

  2. A member's milking technique
  3. Maximum lymph accumulation

    This technique allows for the maximum to increase the member in volume due to strong discharge of lymph.This is due to the lack of massage between approaches;At the same time, the total execution time is about an hour.

    • Perform pumping at the usual pressure level for 5 minutes;
    • For a minute, set the pressure to the minimum level;
    • After resetting the first approach;

    After an hour of such a session, make a noise and then shake the organ about 50 times to get rid of stress.

The end of the session

In the end, it is necessary to gently lower the load on the penis.For this:

  1. It is recommended to urinate after the procedure;
  2. If possible, take a bath or shower;
  3. Put a rubber ring in a member barrel and hold for 40 minutes.
  4. Rings about

The manipulations described above are called the pumping technique of a member in Zainkert;It is known among men around the world.

initial

A man who wants to raise a member of the pump

The above technique of Zainzker is also suitable for beginners.During its execution, it is worth considering the following nuances about how to use vacuum pump:

  • If at the end of the procedure, note the softness of the penis, lethargy and a weakened lifting, the load should be reduced;
  • To eliminate the accumulated lymph, you can use a gel with a baddy;
  • It is strongly recommended to heat the device before placing a member;
  • Do not neglect the use of Mr. Gel.

Beginner users need to realize that continuing pumping immediately to maximum indicators can be dangerous and lead to various injuries.Even with minimally set pressure, it is necessary to monitor your sensations;In the maximum parameters can only be changed after a few months of regular use of the vacuum pump.

How to take care of pumping

  1. After purchasing, the new pump should be thoroughly washed with warm water and soap and treated with a disinfectant;
  2. The same actions should be performed before and after each use of vacuum pump;
  3. Wipe the device dry after cleaning and let it dry completely;
  4. In order for the pump to serve longer, we recommend using water -based gel pieces, not in fat.Do not use creams and gels that contain oil refining products in your composition - for example, mineral oil;
  5. You can't boil the pump as well as treat it with alcohol -containing agents - choose an immortal antiseptic.

Preliminary security measures

You need to know the rules for safe use of the vacuum pump - otherwise, the risk of side effects increases: edema, hematoma, redness, vascular damage, etc.Also, excessive tension can cause tissue necrosis, ligament rupture and chronic dry skin.

A man has side effects after applying pump

Recommendations and rules for the safe use of the pump, given by manufacturers, are as follows:

  • If painful or unpleasant sensations occur during the procedure, stop the session immediately.Find the cause of the discomfort - if it is an injury, classes should stop until complete healing;
  • The load should be increased smoothly, adding one unit each week.The achievement of the effect depends largely on the regularity of the classes, and not the strength of the impact;
  • Beginners are not recommended to perform pumping sessions more than 40 minutes;Experienced users should use the device for no more than an hour in a row.Very long the vacuum effect can critically disrupt blood circulation;
  • You should also not perform more than three sinking sessions a day - very frequent use of the device can have the opposite effect.

Contraindications to use

It is worth remembering that in some cases the use of vacuum pumps can be contraindicated.These include such diseases and body condition:

  • Chronic diseases and infectious and inflammatory processes in the field of the genitourinary system;
  • Problems with liver and kidney work;
  • Patology in the foreskin;
  • Diseases of the cardiovascular system;
  • The risk of blood clots;
  • Diabetes.

We recommend that you start pumping only after prior consultation with a medical specialist in order to avoid negative health consequences.Starting, before you start using the vacuum pump, we also advise you to study the use technique carefully in photo and video guidelines and get acquainted with ratings.

In the end

An increase in a member when using a vacuum pump is more than true - and we are talking not only about the length of the penis but also about its diameter.This result can only be achieved with regular and long -term classes, with the state of competent use of the device.

For starters, we advise you to approach the pumping carefully and get special attention for preparing the procedure, trying not to overdo it.